Loading...

Rewind Spindle

IF THE STRING COMES OFF THE SPINDLE:

Very, very occasionally we have found that if your hens are in a rush to get out of the coop for breakfast, a strong lead hen may push the door up in her haste. This can result in the door string becoming slack and therefore, tangled or dislodged. It happens very rarely, but we have created this guide to show you how to rewind the spindle easily.

Step 1

Confirm that the Red/Black lead is connected correctly, (as per the photo), with the black wire on top.

Note: If the Red/Black lead is connected the wrong way up, the UP and DOWN arrows will react opposite of command.

Step 2

 Correct: Make sure the cord enters and loops UNDERNEATH the spindle.

 

Step 3

 Make sure the cord does NOT enter OVER the top of the spindle.

 

Very, very occasionally we have found that if your hens are in a rush to get out of the coop for breakfast, a strong lead hen may push the door up in her haste. This can result in the door string becoming slack and therefore, tangled or dislodged. It happens very rarely, but we have created this guide to show you how to rewind the spindle easily.

Note: If the cord has been wound on incorrectly, please follow these instructions:

  1. Press MENU to enter the programming mode.
  2. Press UP or DOWN to scroll through the menu until you find: CALIBRATE DOOR.
  3. Press MENU to enter the calibration mode.
  4. Note: Always maintain tension on the cord to prevent it from unravelling.
  5. Press and hold the UP button until the cord has doubled up on itself.
  6. At this point, the cord will start winding itself the other way around on the spindle.
  7. Keep holding the UP button until it has rewound a sufficient amount of cord.

Note: If you are unsure, or don’t feel confident in doing this yourself, please send your unit back to us with a cover note saying that you would like your spindle re-wound and we will do this free of charge for you.  Please don’t forget to include your return address!  And don’t worry, we aim to return your unit the same day, so you won’t be without it for long!

 

Contact Support

Need some extra hands on support?
No problem, we would be happy to help
Our contact info is below

UK: 01223 855636

Mon-Fri 9am-5pm

Our factory

Unit 2, Station Yard, Fulbourn
Cambridgeshire, CB21 5ET, UK

Click Here To Email Us

We use cookies to ensure that we give you the best experience on our website & track visits anonymously. If you continue to use this site we will assume that you are happy with it.